GD

Servo and stepping motor drive electronics

  • IONI Servo & Stepper...

    €149.00

    IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors).

  • NDR-480-48, 480 W 48...

    €121.00

    Mean Well 480 Watt 48 VDC power supply to be used with IONI, ATOMI and SimuCUBE devices.

  • IONICUBE 1X WIDE...

    €84.50
    IONICUBE 1X WIDE is a single axis motherboard for IONI Servo Drives. IONICUBE 1X WIDE provide one slot for IONI drive as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2. The difference between standard and WIDE version is that WIDE version supports wide logic voltage supply range of 9 to 50 VDC while standard version supports only 9-24 VDC. This helps to elimianate second power supply from the system.
  • IONICUBE 1X Single...

    €74.50

    IONICUBE 1X is a single axis motherboard for IONI Servo Drives. IONICUBE 1X provide one slot for IONI drive as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2.

  • RSP-320-48, 320 W 48...

    €63.90

    Mean Well 320 Watt 48 VDC power supply to be used with IONI & ATOMI drives.

  • MiGE motor cable set

    €47.00

    Extension cable set contains ~3 meter (~10 feet) extension cables for MiGE servo motors.

  • SPIN series 5 meter...

    €47.00

    Extension cable set contains ~5 meter (~16 feet) extension cables for Spin series motors.

  • SPIN series 3 meter...

    €42.00

    Extension cable set contains ~3 meter (~10 feet) extension cables for Spin series motors.

  • SPIN series 1.5 meter...

    €36.00

    Extension cable set contains ~1.5 meter (~5 feet) extension cables for Spin series motors.

  • SimpleMotion V2 USB...

    €24.50

    A bundle of SimpleMotion V2 break-out board (SMV2BRK) and SimpleMotion V2 USB adapter (SMV2USB). These are items to be used with any SimpleMotion V2 bus based devices (Argon). SMV2KIT is highly recommended for anyone purchasing Argon drives.

  • RS-25-24, 25 W 24 VDC...

    €21.00

    Mean Well 25 Watt 24 VDC power supply to be used with IONICUBE and ARGON devices.

  • SimpleMotion V2 USB...

    €19.50

    A RJ45 cable is required to connect the adapter to the drive (not included). For suitable cables and their suppliers, see this link