Motor controls

  • Argon heat sink

    €19.00

    Optional heat sink for Argon servo drive.

  • Argon regenerative...

    €24.68

    150 Watt 100 ohm regenerative braking resistor for Argon servo drive. Ideal for 200-240VAC installations. Typically one resistor is sufficient for multiple drives.

  • Argon resolver adapter

    €9.90

    Argon resolver adapter is a small sized device that adds resolver feedback device support to the Argon servo drive.

  • IONI Pro HC Servo &...

    €199.00

    IONI Pro HC is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors).

  • IONI Pro Servo &...

    €179.00

    IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors).

  • IONI Servo & Stepper...

    €149.00

    IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors).

  • IONICUBE 1X WIDE...

    €84.50
    IONICUBE 1X WIDE is a single axis motherboard for IONI Servo Drives. IONICUBE 1X WIDE provide one slot for IONI drive as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2. The difference between standard and WIDE version is that WIDE version supports wide logic voltage supply range of 9 to 50 VDC while standard version supports only 9-24 VDC. This helps to elimianate second power supply from the system.
  • SimpleMotion V2...

    €7.25
    SimpleMotion V2 break-out board (SMV2BRK) is an accessory to be used with any SimpleMotion V2 bus based devices (especially useful with Argon). SMV2BRK reduces wiring work and chance of error. SMV2BRK is highly recommended for anyone purchasing: Argon servo drives SMV2USB adapter Also notice that SMV2USB and SMV2BRK are available as kit SMV2KIT which has lower cost than the two separately.
  • SimpleMotion V2 USB...

    €24.50

    A bundle of SimpleMotion V2 break-out board (SMV2BRK) and SimpleMotion V2 USB adapter (SMV2USB). These are items to be used with any SimpleMotion V2 bus based devices (Argon). SMV2KIT is highly recommended for anyone purchasing Argon drives.

  • SimuCUBE evaluation kit

    €489.00

    A kit for developing a force feedback system based on SimuCUBE and IONI Pro HC drive

  • SPIN series 100W AC...

    €199.00

    Spin series AC servo motors exhibit low inertia and high power density. Motor comes with 2 500 PPR (10 000 counts/rev) encoder and configuration file template for IONI servo drive saving from the hassle and chance of error. 

    Notice: Motor extension cables are not included in this product, please order motor cable set according to your desired length.

  • SPIN series 200W AC...

    €219.00

    Spin series AC servo motors exhibit low inertia and high power density. Motor comes with 2 500 PPR (10 000 counts/rev) encoder and configuration file template for IONI servo drive saving from the hassle and chance of error. 

    Notice: Motor extension cables are not included in this product, please order motor cable set according to your desired length.