Motor controls
There are 20 products.
-
-
Argon regenerative...
€24.68150 Watt 100 ohm regenerative braking resistor for Argon servo drive. Ideal for 200-240VAC installations. Typically one resistor is sufficient for multiple drives.
-
Argon resolver adapter
€9.90Argon resolver adapter is a small sized device that adds resolver feedback device support to the Argon servo drive.
-
IONI Pro HC Servo &...
€199.00IONI Pro HC is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors).
-
IONI Pro Servo &...
€179.00IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors).
-
IONI Servo & Stepper...
€149.00IONI is a digital motor drive designed for driving AC/BLDC and DC servo motors and steppers. IONI allows controlling motors in all three operating modes: position control, velocity control and torque control (torque mode only with servo motors).
-
IONICUBE 1X WIDE...
€84.50IONICUBE 1X WIDE is a single axis motherboard for IONI Servo Drives. IONICUBE 1X WIDE provide one slot for IONI drive as well as terminals and connectors for motor power, feedback devices, I/O and SimpleMotion V2. The difference between standard and WIDE version is that WIDE version supports wide logic voltage supply range of 9 to 50 VDC while standard version supports only 9-24 VDC. This helps to elimianate second power supply from the system. -
MiGE 400W AC servo motor
€298.90MiGE series AC servo motors exhibit low inertia and high power density. Motor comes with 2 500 PPR (10 000 counts/rev) encoders and configuration file template for Argon servo drive saving from the hassle and chance of error.
-
NDR-480-48, 480 W 48...
€121.00Mean Well 480 Watt 48 VDC power supply to be used with IONI, ATOMI and SimuCUBE devices.
-
RS-25-24, 25 W 24 VDC...
€21.00Mean Well 25 Watt 24 VDC power supply to be used with IONICUBE and ARGON devices.
-
RSP-320-48, 320 W 48...
€63.90Mean Well 320 Watt 48 VDC power supply to be used with IONI & ATOMI drives.
-
SDR-480-48, 480 W (720...
€172.00Mean Well 480 Watt 48 VDC power supply to be used with IONI, ATOMI and SimuCUBE devices.